4CH 70MHz 1GSa/s Oscilloscope 8CH Logic Analyzer 25MHz Waveform Signal Generator

Description

MSO5074FG
Feature
4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(Only MSO5074FG).
Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger.
Large
7 inch
64K color Display,
WVGA: 800*480
.
USB host and device connectivity, standard.
Ultrathin desigh, handy volume, easily portable.
VGA Optional
Oscilloscope
1Gsa/s
Real Sample Rate;
4 Channels
Oscilloscope;
70MHz Bandwidth, 1M Record Length
;
32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis.
Logic Analyzer
8 Channles
Logic Analyzer;
500MHz Sample Rate
1MRecord Length
Arb. Waveform Generator(
Only MSO5074G
)
25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz)
200MSa/s Sample Rate;
12bit Pattern Generator
50MHz Frenquery Counter
Model
MSO5074F
MSO5074FG
Channel
4
Bandwidth
70MHz
Rise Time
5ns
Real time sample rate
1GSa/s
Record Length
1M
SEC/DIV Range
4ns/div~40s/div
Delay time Accuracy
500ps
A/D Converter
8bit resolution
Volts/div range
2mV/div~ 5V/div at input BNC
Position Range
20ns/div to 80us/div; (-8div x s/div) to 40ms;
200us/div to 40s/div; (-8div x s/div) to 400s;
DC Gain Accuracy
±3% for Normal or Average acquisition mode, 5V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
Input
Inputs Coupling
AC, DC, GND
Inpits Impendance
1MΩ±2%
‖
20pF±3pF
Probe Attenuation
1X, 10X
Trigger System
Trigger Types
Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source
CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes
Auto, Normal, Single
Coupling Type
DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2, CH3, CH4): 1div from DC to 10MHz;1.5div from 10MHz to Full;
DC(EXT): 200mV from DC to Full;
DC(EXT/5):1V from DC to Full;
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
；
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range
CH1, CH2, CH3, CH4: ±8 divisions from center of screen;
EXT: ±1.2V;
EXT/5:±6V
Trigger Level Accuracy( typical) signals having rise and fall times
≥
20ns
CH1, CH2, CH3, CH4: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical)
Operates with input signals ≥50Hz
Measurement
Cursor Measurement
Manual: Voltage difference between cursors:
△
V
Time difference between cursors:
△
T
Reciprocal of
△
T in Hertz (1/ΔT);
Tracing: The valtage and time at a waveform point;
Auto Measuerment
Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH,  FRF
Math
+, -, *, /, FFT
Logic Analyzer Specifications
Channels
8 Channels
Max. Input Impendence
200K(C=10p)
Input Voltage Range
0V~3V
Logic Threshold Range
0V~3V
Max. Sample Rate
500MSa/s
Compatible Input
TTL, CMOS, ECL
Sample Depth
1M
Edge Trigger
D0-D7 select slope (rising or falling edge)
Pulse Width Trigger
D0-D7 select pulse polarity (positive or negative pulse), trigger when (=,
≠
, >, <), trigger pulse width
Code-type Trigger
D0-D15 select code-type (H, L, X)
Duration Trigger
D0-D7 select persist time and trigger when (data terminate, data start, and data delay)
Queue Trigger
D0-D7 select specific data index (0-3) and code-type (H, L, X)
Repeat Trigger
D0-D7 select code-type (H, L, X) and repeat times
Arb. Waveform Generator Specifications (MSO5074FG)
Wave frequency
DC~25MHz
DAC clock
2K~200MHz adjustable
Waveform Length
4KSa
Vertical Resolution
12 bit
Frequency stabilization
<30ppm
Amplitude
±
3.5V Max.
Output impedance
50
Ω
Output  current
50mA Ipeak=50mA
System Bandwidth
25M
Wave distortion
-50dBc(1KHz),  -40dBc(10KHz)
Frequency area
DC~50MHz
Input Amplitude
400mVpp~18Vpp
Coupling
DC
Frequency precision
±
Time Base Error
±
1 Count
input impedance
> 100K
Ω
Pattern Generator
12Bit
General Feature
Supply Voltage
100-120VACRMS(±10%), 45Hz to 440Hz, CAT
Ⅱ
120-240VACRMS(±10%), 45Hz to 66Hz, CAT
Ⅱ
Power Consumption
<30W
Display Type
7 inch 64K color TFT LCD,(WBGA 800*480)
Size & Weight
385*200 * 245(mm), 3.5kg
Note: we'll ship this item via
express mail service
to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine and Singapore.
Clients from other countries please contact with us in advance to confirm the different shipping charges before you order.