6 in1 Oscilloscope/Recorder/DMM/ Spectrum/Frequency/generator DSO8000E 70-200M

Description

Store category
Sign Up Now !
You may also like
HANTEK Handheld Digital Storage Oscilloscope DSO8000E 70MHz-200MHz
Product Description
Brand
HANTEK
Model
DSO8000E
Type
DIGITAL
Channels
2
Sample Rate
1GS/s
Rise Time at BNC( typical)
1.8ns
Country/Region of Manufacture
China
MPN
Does Not Apply
Maximum Bandwidth
70-200MHZ
Number of Channels
2
Maximum Real-Time Sampling Rate
1 GSa/s
Oscilloscope Type
Digital Storage Oscilloscope (DSO)
DSO8000E Series
Six in one: Oscilloscope/Recorder/DMM/ Spectrum Analyzer/Frequency Counter/Arbitrary Waveform generator. IP-51 rated for dust, drip and shake proof to withstand harsh environments.
Large fuse confirms to European Safety Standard. Battery indicator with easy-changed connect points. Selectable 18650 battery box for matching 18650 battery by yourself.
Anti-theft lock hole, tripod fixed hole, hang rope, FLASH light that can be used in darkness. Replaceable BNC safety joints, and additional one set of joints. 1GSa/s sample rate,
2M Memory depth, 6000 counts DMM. Large 5.6 inch TFT Color LCD Display; High Resolution(640*480)
Six in one: Oscilloscope/Recorder/DMM/ Spectrum Analyzer/Frequency Counter/Arbitrary Waveform generator.
IP-51 rated for dust, drip and shake proof to withstand harsh environments.
Large fuse confirms to European Safety Standard.
Battery indicator with easy-changed connect points. Selectable 18650 battery box for matching 18650 battery by yourself.
Anti-theft lock hole, tripod fixed hole, hang rope, FLASH light that can be used in darkness.
Replaceable BNC safety joints, and additional one set of joints.
High bandwidth 70MHz-200MHz Oscilloscope, 1GSa/s sample rate, 2M Memory depth.
25Mz Arb. Waveform Generator, 200 Mesa/s DDS, 12 bit vertical resolution, easy for simulating transducer
6000 Counts DMM, AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function.
FFT spectral analysis; Waveform Math: add, subtract, multiply and divide; X-Y mode; more than 20 automatic measurements; PASS/FAIL Check function, apply to engineering application.
Abundant trigger function, double timebase sampling, easy to observe two waveforms in different frequency.
Record and replay of more than 1000 waveforms.
Large 5.6 inch TFT Color LCD Display; High Resolution(640*480)
USB Host/Device 2.0 full-speed interface; support removable disk; WIFI/LAN Option, easy to control by PC or long-distance.
Waveform data can be output in WORD，EXCEL, BMP, JPG as time and voltage.
Model
DSO8072E
DSO8102E
DSO8152E
DSO8202E
Acquisition
Sample Modes
Real-Time Sample
Acquisition Modes
Normal
Normal data only
Peak Detect
High-frequency and randon glith capture
Average
Wavefom Average, selectable 4,8,16,32,64,128
Inputs
Inputs Coupling
AC, DC, GND
Inputs Impendance
1MΩ±2%
‖
20pF±3pF
Probe Attenuation
1X, 10X
Supported Probe Attenuation Factor
1X, 10X, 100X, 1000X
Maximum Input Voltage
CAT I and CAT II: 300VRMS (10×), Installation Category;
CAT III: 150VRMS (1×)
Horizontal System
Sample Rate Range
1GS/s
Waveform Interpolation
(sin x)/x
Record Length
2M
SEC/DIV Range
4ns/div~2000s/div, in a
2, 4, 8 sequence
2ns/div~2000s/div, in a
2, 4, 8 sequence
Sample Rate and
Delay Time Accuracy
±50ppm over any
≥
1ms time interval
Scanning Speed Range
4ns/div to 8ns/div; (-8div x s/div) to 40ms;
20ns/div to 80μs/div;(-8div×s/div) to 40ms;
200μs/div to 40s/div;(-8div×s/div) to 400s;
2ns/div to10ns/div;
(-4div×s/div) to 20ms;
Delta Time Measurement Accuracy
(Full Bandwidth)
Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200
Vertical System
Vertical Resolution
8-bit resolution, all channel sampled simultaneously
Volts Range
2mV/div to 100V/div at input BNC
Bandwidth
70MHz
100MHz
150MHz
200MHz
Rise Time at BNC( typical)
5ns
3.5ns
2.3ns
1.8ns
Analog Bandwidth in
Normal and Average
modes at BNC or with probe,
DC Coupled
±400V(100V/div-20V/div);
±50V(10V/div-5V/div);
±40V(2V/div-500mV/div);
±2V(200mV/div-50mV/div);
±400mV(20mV/div-2mV/div);
Math
+, -, *, /, FFT
FFT
Windows:
Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point
Bandwidth Limit
20MHz
Low Frequency Response (-3db)
≤10Hz at BNC
DC Gain Accuracy
±3% for Normal or Average acquisition mode, 100V/div to 10mV/div.
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div.
DC Measurement Accuracy,
Average Acquisition Mode
Measurement Type: Average of
≥
16 waveforms with vertical position at zero
Accuracy: ± (3% × reading + 0.1div + 1mV) when 10mV/div or greater is selected.
Measurement Type: Average of
≥
16 waveforms with vertical position not at zero
Accuracy: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div].
Volts Measurement Repeatability,
Average Acquisition Mode
Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions
Trigger System
Trigger Types
Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source
CH1, CH2, AC Line
Trigger Modes
Auto, Normal, Single
Coupling Type
DC, AC, HF Reject, LF Reject, Noise Reject
Trigger Sensitivity
(Edge Trigger Type)
DC(CH1,CH2):
1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
AC: Attenuates signals below 10Hz ;
HF Reject: Attenuates signals above 80kHz;
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz.
Trigger Level Range
CH1/CH2: ±8 divisions from center of screen;
Trigger Level Accuracy( typical)Accuracy is for signals having rise and fall times ≥20ns
CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen;
Set Level to 50%(typical)
Operates with input signals ≥50Hz
Video Trigger
Video Trigger Type
CH1, CH2: Peak-to-peak amplitude of 2 divisions;
Signal Formats and Field Rates
Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff Range
100ns ~ 10s
Pulse Width Trigger
Pulse Width Trigger Mode
Trigger when (< , >, = , or ≠); Positive pulse or Negative pulse
Pulse Width Trigger Point
Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
Less than: The trigger point is the trailing edge.
Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width
Pulse Width Range
20ns ~ 10s
Slope Trigger
Slope Trigger Mode
Trigger when (< , > , = , or ≠ ); Positive slope or Negative slope
Slope Trigger Point
Equal: The oscilloscope triggers when the waveform slope is equal to the set slope.
Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope.
Less than: The oscilloscope triggers when the waveform slope is less than the set slope.
Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.
Time Range
20ns ~ 10s
Overtime Trigger
Over Time Modee
Rising edge or Falling edge
Time Range
20ns ~ 10s
Alternative Trigger
Trigger on CH1
Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger on CH2
Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger Frequency Counter
Readout Resolution
6 digits
Accuracy (typical)
±30ppm (including all frequency reference errors and ±1 count errors)
Frequency Range
AC coupled, from 4Hz minimum to rated bandwidth
Signal Source
Pulse Width or Edge Trigger modes: all available trigger sources
The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed.
Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify as triggerable events, such as narrow pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time.
Edge Trigger mode: The oscilloscope counts all edges of sufficient magnitude and correct polarity.
Video Trigger mode: The Frequency Counter does not work.
Measure
Cursor Measurement
Manual: Voltage difference between cursors:
△
V
Time difference between cursors:
△
T
Reciprocal of
△
T in Hertz (1/ΔT);
Tracing: The valtage and time at a waveform point;
Auto Measuerment
Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS,
Waveform Generator Mode
Frenquency Range
1Hz(DC)~25MHz
DAC Clock
2K~200MHz adjustable
Memory Depth
4KSa
Vertical Resolution
12 Bits
Stability
<30ppm
Amplitude
±3.5V Max.
Output Impedance
50 Ω
Output Current
50mA Ipeak=50mA
System Bandwidth
25M
Harmonic Wave Distortion
-50dBc(1KHz), -40dBc(10KHz)
General Specifications
Display Resolution
640 horizontal by 480 vertical pixels
Display Contrast
Adjustable (16 gears) with the progress bar
Probe Compensator Output
Output Voltage( typical)
About 2Vpp into
≥
1MΩ load
Frequency(typical)
1kHz
Power Supply
Supply Voltage
AC Input:100-240VACRMS,0.6A MAX,50Hz~60Hz; DC Output:9V,2A
Power Consumption
<30W
Environmental
Temperature
Operating: 32
℉
to 122
℉
(0
℃
to 50
℃
);
Nonoperating: -40
℉
to 159.8
℉
(-40
℃
to +71
℃
)
Cooling Method
Convection
Humidity
+104
℉
or below (+40
℃
or below): ≤90% relative humidity;
106
℉
to 122
℉
(+41
℃
to 50
℃
): ≤60% relative humidity
Altitude
Operating: Below 3,000m (10,000 feet);
Nonoperaring: Below 15,000m(50,000 feet)
Mechanical
Size
260mmmm; 220mm; 75mm
Weight
2.5KG(without Packing)
DMM Mode
Max. Resolution
6000 Counts
DMM Testing Modes
Voltage, Current, Resistance, Capacitance, Diode & Continuity
Max. Input Voltage
AC:600V, DC: 800V
Max. Input Current
AC: 10A, DC:10A
Input Impedance
10MΩ
DMM
TrendPlot
1.2M Point
Range
Resolution
Accuracy
Resolution
DC Voltage
60.00mV
±1%±3 digit
10uV
600.0mV
100uV
6.000V
1mV
60.00V
10mV
600.0V
100mV
800V
1V
AC Voltage
60.00mV
±1%±3 digit
10uV
600.0mV
100uV
6.000V
1mV
60.00V
10mV
600.0V
100mV
DC Current
60.00mA
±1%±5 digit
10uA
600.0mA
±1.5%±5 digit
100uA
6.000A
1mA
10.00A
10mA
AC Current
60.00mA
±1%±5 digit
10uA
600.0mA
±1.5%±5 digit
100uA
6.000A
1mA
10.00A
10mA
Resistance
600
Ω
±1%±3 digit
0.1Ω
6.000K
Ω
1Ω
60.00K
Ω
10Ω
600.0K
Ω
1KΩ
6.000M
Ω
10KΩ
60.00M
Ω
±1%±5 digit
100KΩ
Capacitance
40.00nF
±2%±5 digit
10pF
400.0nF
100pF
4.000uF
1nF
40.00uF
10nF
400.0uF
100nF
Attention: the smallest capacitance value that can be measured in 5nF
Diode
0V~2.0V
ON-OFF test
<10Ω
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We reserve all right to refuse high bidders having negative, hidden feedback, all non-registered bidders or bidder with unpaid history.
2. We accept
PAYPAL PAYMENT ONLY !
3. If you paid by e-cheque via Paypal, we will send the item(s) to you after the payment was cleared. It normally takes 5-7 business days for payment processing.
4. Payment is expected to be completed within 3 days after auction closed. Unpaid auction will be forfeited and eBay may suspend unpaid buyer account.
Delivery details
Your order will be shipped within 1-2 business days once we receive your payment.
If you pay by e-check, we will ship your order once your payment is cleared.
Delivery address on ebay ,Please make sure payment address in ebay is correct. Any non-received items caused by invalid address registered on Paypal are not in our full refund or replacement policy.
Normally, you should receive item within 2-4 weeks. Email us first if not receive items after 40 working days after full payment sent
Sometimes the package maybe stay at customs for long time or delayed by public holidays and bad weather,Please understand this international Shipping
Country
Delivery Time
Working Days
(not including holiday)
5-7
8-11
12-14
15-19
20-22
>22
Working Days + Saturday + Sunday
5-9
10-15
16-20
21-25
26-30
>31
United States
Rate (item arrived)
5 .1%
50.1%
29.6%
10.5%
4.7%
Refund
United Kingdom
Rate (item arrived)
9.9%
63.2%
19.1%
3.4%
4.4%
Refund
Australia
Rate (item arrived)
21.4%
50.0%
14.3%
7.2%
7.1%
Refund
France
Rate (item arrived)
10.5%
28.6%
43.8%
10.1%
7.0%
Refund
Germany
Rate (item arrived)
11.1%
22.2%
30.3%
20.9%
15.5%
Refund
Canada
Rate (item arrived)
0.0%
47.
1
%
31.4%
17.6%
3.9%
Refund
Spain
Rate (item arrived)
3.5%
25.0%
47.9%
12.9%
10.7%
Refund
We do not ship on weekend or public holidays.
We do not offer combined shipping discount unless
othe
rwise specified in the auction
.
International buyers – Please Note :
Import duties, taxes and charges
are not included in the item price or shipping charges. These charges are the buyer's responsibility
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipment charges
All transport costs are set according to the DHL / FEDEX, but does not include Remote Area surcharge and any customs fees. Remote areas of inquiry, please click the DHL Web.
Enter your country and postal code to check it, if your location are remote area,DHL company will charge Remote surcharge,the amount we will inform you at the first time, the amount depend on the package weight and Parcel size,hope for your understanding and pay the extra fees early. if so your item will be shipped out asap.
Some countries have been excluded, to obtain shipping prices, please contact us through EBAY message
Terms of sales
For customers who purchase items which enjoy Money Back Policy, please kindly read the terms and conditions below before returning:
1.The item must be returned in original resaleable condition with all tags and packaging .
2.DO NOT stick or write anything on the item itself or its packaging.Please only write or place postage stickers on the outer postage packaging.
3.It would be at the buyer’s own cost to return the unwanted item.
4.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
If you ask for replacement or repair after one month since you paid, you need to pay for the 2nd shipping cost & handling
.
If you have to return the item for the refund, you will pay a 20 % restocking fee.
5.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying,
If because the tariff or customs clearance in your country lead to return goods back, and reject the receipt or not with the customs clearance, we do not refund your paykment.
About us
1. We hope to received you 5 star positive feedback when you get the item.
2.
Our mission:
To provide our customers the tops quality products with good price, fast shipping and best service.
Contact us
If you have any questions, please contact us through ebay mail (click contact seller). We will reply you immediately.
Please believe us before you open case, or leave neutral and negative feedback, we will offer good solutions to any problems.
Feedback