Agilent MSO6014A 4 channel 100MHz 2GS/s MSO / oscilloscope with all probes

Description

Up for sale is an Agilent 4 channel 100MHz 2GSa/s MSO6014A MSO (Mixed Signal Oscilloscope).
Probes included:
QTY 1 logic probe with all 18 grabbers, tested. The logic probe is from one of HP's dedicated logic analyzers, and has a bandwidth of 500MHz. The logic probe that normally comes with this scope is rated at 250MHz.The termination characteristics of both are the same.
QTY 4 10074C 10:1 passive probes, tested. The passive probes come with QTY 2 hook tips and QTY 1 GND lead.
Comes with a power cord.
The scope passes all of its self tests and calibration routines, and is working perfectly. Digital, GPIB, USB and LAN ports are tested. If you decide to have a third party lab calibrate the unit, I guaranty that the scope will pass. Cosmetically, the scope is in great condition. This scope is ready to go to work for you.
I was asked about why the word "Failure:" is shown in the user calibration status. This is normal. The scope passes the user calibration every time.
From the user manual on page 396:
User Cal Status
Pressing [Utility]&Service&User Cal Status displays the summary results of the
previous User Cal, and the status of probe calibrations for probes that can be calibrated.
Note that passive probes do not need to be calibrated, but InfiniiMax probes can be
calibrated. For more information about calibrating probes see page 78.
Results:
User Cal date:
Change in temperature since last User Cal:
Failure:
Comments:
Probe Cal Status:
Returns accepted only if defective. I will only ship to verified addresses in the continental United States. Your business means a lot to me. If you have any problems please contact me before leaving negative feedback or opening a case against me, and I'll work things to your satisfaction.
Thanks for looking.