-40%
Handheld Oscilloscope Digital Multimeter 3 In 1 Color DMM 50MHz Single Channel
$ 106.12
- Description
- Size Guide
Description
Shop CategoryStore Home
HOME METER
◈ Stud Finder
Handheld Oscilloscope Digital Multimeter 3 In 1 Color DMM 50MHz Single Channel
General Introduction
This oscilloscope is designed according to the research, production, debugging and repair requirements of many electronic engineers. In contrast to traditional oscilloscope is equipped with a built-in lithium battery and can work without external power supply, so it is convenient for carrying, especially for field application. It has three trigger modes- Auto, Normal and Single. You can lock and save the waveform of a non-periodical signal which a traditional oscilloscope can not capture.
The oscilloscope features compactness, beautiful appearance and friendly interfaces. It can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineer's assistant, and will provide great convenience for you in work.
Need Your Attention Please
In order to obey the Shipping Security Rule and in order to passing the customs security check. We had disconnect the plug of battery to make it keep insulated. You need to take off the battery cover on the back of the oscilloscope, then plug in the battery before first-use.
Note:
Orders from the USA will all be shipped out via our US warehouse.
If you order from outside of US the product will be shipped from China.
Functions
Scope function
Multimeter function
Signal generator function
Characteristics
320 × 240 pixels high-resolution color LCD, which has a higher information displaying capacity and a better displaying effect.
The oscilloscope is equipped with a high-capacity lithium battery, and supports multi placement methods, for example, it can be placed on the tilt stand, gripped by one hand, or hung. It is convenient for applications in various fields.
Waveform and waveform parameter(s) can be displayed simultaneously on the screen, you can measure and display any three of the ten parameters- peak to peak value, maximum value, minimum value, average value, mean square root, frequency, period, duty cycle, rise time and fall time.
Auto set function sets time base and vertical range automatically{C}.
Selectable language ( Chinese or English ), easy to operate.
Compactness and light weight ( about 700g )
Specification
Performance of Oscilloscope
Bandwidth (-3dB)
50MHz
Sampling Rate
Max. real time sampling rate 200MSa/s
Channel
1
Coupling
AC, DC
Rise Time
≤ 7.6ns
Input Impedance
1MΩ, ≤ 20pF
Max Input Voltage
1x CAT III 300 VAC 10x, 100x CAT III 600 VAC
Vertical Resolution
8 bit
Vertical Sensitivity
10mV/div - 5V/div
Horizontal Resolution
2ns/div
Horizontal Sensitivity
2ns – 5s
Record Length
4K/channel
Memory
6 memory locations
Trigger Mode
Auto, Normal, Single
Trigger Type
Edge trigger
Basic Performance
Screen
320×240 pixels (RGB), with LED backlight
Communication
USB, PC software
Battery
3.7V lithium polymer battery, 4Ah
Adapter
Input Voltage: 100Vac - 240Vac
Output: 5Vdc ± 10%, 2000mA
Operating Environment
Temperature: 0℃ - 40℃
Humidity:
≤
75%
Storage Environment
Temperature: -10℃ - 50℃
Humidity:
≤
85%
Operating Altitude
0 - 2000m
Size
218mm × 118mm × 50mm ( including holster )
Weight
700g(main body only)
Performance of multimeter
Display
6000 counts
Input
Max. Input Voltage: 600 Vrms CAT II, 300 Vrms CAT III
Continuity Test
Beeps at < 25Ω, in 600Ω range
Diode Test
If the voltage drop of the diode under test is more than 2V or if the test circuit is open, the display will show " OL ". If the voltage drop is less than 0.25V, the built-in buzzer will sound.
Capacitance Measurement
6.000nF - 6mF
Resistance Measurement
600.0Ω - 60.00MΩ
Voltage Measurement
6.000V - 600V
Waveform output performance
Amplitude
Output amplitude is adjustable.
Output amplitude range: 0 - 2.5V
Output amplitude accuracy: ± 2% for amplitudes < 2V
± 5% for amplitudes > 2V
Frequency
There is no frequency setup for dc output.
Output frequency range: 26Hz - 50kHz
Output frequency accuracy: ± 2%
Specification of Oscilloscope
Vertical System: channel of Oscilloscope
Bandwidth (-3dB)
50MHz
Accuracy
10mV/div to 20 mV/div: ± 5% full scale
50mV/div to 5V/div: ± 3% full scale
Vertical Offset Accuracy (DC)
±0.2 div ±2mV ±0.5% offset value
Trigger Sensitivity
DC to 50 MHz: 0.8 div
Specification of probe
Rise Time
X1 < 23.3ns
X10 < 7.6ns
Bandwidth
X1 DC - 8MHz
X10 DC - 50MHz
Input Impedance
X10 10MΩ (not including the Scope's input resistance 1MΩ)
Input Capacitance
X1 46pF ( not including the Scope's input capacitance )
X10 about 15pF
Specification of Multimeter
Function
Range
Frequency,test current,or load voltage
Condition:at calibration temperature±5℃, for 1
year
Voltage
DC Voltage
6.000V
1.0 + 8
60.00V
0.5 + 8
600.0V
0.5 + 8
AC Voltage
6.000V – 600.0V
40Hz–400Hz
1.0 + 10
400Hz–2kHz
5.0 + 10
Resistance
600.0Ω
1.0 + 5
6.000kΩ
1.0 + 5
60.00kΩ
1.0 + 5
600.0kΩ
1.0 + 5
6.000MΩ
1.0 + 5
60.00MΩ
2.0 + 10
Capacitance
6.000nF
3.0 + 8
60.00nF
3.0 + 8
600.0nF
3.0 + 8
6.000μF
3.0 + 8
60.00μF
3.0 + 8
600.0μF
3.0 + 8
6.000mF
3.0 + 8
Continuity
Buzzer beeps if the resistance is less then about 25Ω.
Diode
Buzzer beeps if the forward voltage drop of the diode is < 0.25V.
Payment
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping
1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b.Please check with your country's customs office to determine what these additional costs will be prior to buying.
Returns
Returns Accepted, Buyer, 30 Days, Money back or exchange (buyer's choice)
1.Incoming damaged or defective when you receive, please contact us within 2 days after receiving the item.
2.Replacement or refund will be proceeded once defect confirmed.
3.Please be reminded when return, the items should be with original condition ( original packing, accessories, unused item…).
4.Except incoming defect, returning shipping fee is handled by buyer.
Contact Us
Please feel free to contact us via eBay or e-Mail if you have any question. We will reply within 24 hours in working day.
All rights reserved.
Powered by SoldEazy