Mini Tap and Die Set 14 Taps & Screwplate & Pin Vise Set 0.7-2mm Jewelry Making

Description

MINI TAP & DIE SET
JEWELRY & WATCH
14 TAPS WITH SCREW-PLATE & PIN VISE
MICRO TOOLS - MINIATURE SET
-
FOR THREADING
WIRES & POSTS
-
A miniature Tap and Die Set, used in
Jewelry making and Watch repair made to be used with soft precious metals (For use with Gold, Silver, Copper and Brass). Set can be used for making both internal and external threads on small parts.
Set
comes with fourteen different taps and a matching screw-plate
along with a 4" pin vise
.
The range of this set is from
2.00mm down to 0.7mm
for threading wire or re-threading stripped threads on screws. A handy economical Tap & Die set, made in India.
Set can be used to thread wire, for re-threading of stripped threads on screws, earring backs and watch repair parts.
Screw-plate (Die) is used for threading wire or making your own screws, while the individual taps are used with a pin vise.
Always
use a cutting fluid
when using the Taps and Plate/Die, turn a few threads and reverse slightly to remove the metals that have been cut. The proper use will ensure the taps and die-plate to last longer.
.
Note:
See other Sets of Taps & Dies
: EBAY ID #'s >
190858877400
or
190572470531
.
Features - Specifications:
JETS Product # 2009-761 + 2203-273
-
TAPS - 14 Sizes
-
Range: 0.7 - 2.0 mm
-
Increments of 0.1mm
-
Hardened & Tempered
-
SCREW-PLATE
Range 0.7-2.0mm
-
Pin Vise:  3-1/2" -
Hold Taps and can be used for Drilling etc...
SHIPPING: Via USPS First-Class Mail
NOTE: Visit
JETSTOOLS
ebay Store Listings, where you can see many other Jewelry Making Supplies and Hand Tools along with a line of
J
ewelers
E
quipments
T
ools
and
S
upplies
.
JETSInc.
E3
514 CKSP Z M P