Sloan SF2250 (3362145) Battery-Powered Deck-Mounted Body Fct in Polished Chrome

Description

BRAND NEW
LIST PRICE IS 499.99
YOUR COST IS 489.99     PLUS
FREE SHIPPING
Comes with Sloan SFP-22-A Trim Plate 8" (Single Hole)
CODE NUMBER
3362145
DESCRIPTION
4" Trim Plate, Battery Power Supply, Back-Check Tee, Polished Chrome Finish, 1.5 gpm, Laminar Spray, Infrared Sensor, Sloan Battery-Powered Deck-Mounted Gooseneck Body Faucet.
DETAILS
Flow Rate: 1.5 gpm (6 Lpm) (1.5GPM)
Spray Type: Laminar (LAM)
Sensor Type: Infrared (IR)
Mounting Type: Single Hole
Trim Plate: 4" (102mm) (4)
Power Supply: Battery (BAT)
Temperature Mixer: Back-Check Tee (TEE)
Finish: Polished Chrome (CP)
Factory Default Timeout: 30s Factory Default GPC: 0.75
FEATURES
Commercial Grade, ADA Compliant, Electronic, Sensor-Activated, Brass Gooseneck Hand Washing Faucet with the following features:
Adjustable Infrared Sensor Range 36” (914 mm)
Long Sensor Cable 24” (610 mm)
Long Flex Hose Filtered Solenoid Valve with serviceable Strainer Filter
Includes Four (4) AA-size Batteries
Includes appropriate Mounting Hardware
ELECTRICAL SPECIFICATIONS
Battery Life: 2 years 8,000 cycles/month
Sensor Range: 4" – 12" (102 – 305mm)
Timeout Adjustment Settings: 30s
WARRANTY
1 Year
How Do You Make a Warranty Claim?
Sloan Valve Company only permits distribution and resale of its products through authorized accounts, such as plumbing supply wholesalers and plumbing contractors. Except as otherwise may be required by applicable law, this warranty is void unless you purchased this product directly from an authorized account holder.  If your product was purchased from an authorized account holder, you can initiate a claim under this warranty by either reaching out via email to Sloan, or a phone call. This info should be with your manual that comes with the product.  The customer must (a) obtain a Return Merchandise Authorization (RMA) number from Sloan Valve Company prior to returning any product, (b) include the RMA number (and proof of purchase, including identification of the authorized reseller from whom you purchased the product, unless the product was registered with Sloan Valve Company within 30 days of its purchase) and (c) be responsible for and prepay any shipping expense in connection with the return of any product to Sloan Valve Company.  Any product returns, including returns for reasons other than warranty claims (e.g., the customer ordered the wrong product), are subject to Sloan Valve Company’s Return Policy which can be found on the Sloan Valve Company website
DISCLAIMER OF WARRANTIES
EXCEPT AS STATED ABOVE IN THIS LIMITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, SLOAN VALVE COMPANY DISCLAIMS ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES AND CONDITIONS WITH RESPECT TO THE PRODUCT, ELECTRONICS AND SOFTWARE INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, SLOAN VALVE COMPANY ALSO LIMITS THE DURATION OF ANY APPLICABLE IMPLIED WARRANTIES OR CONDITIONS TO THE DURATION OF THIS LIMITED WARRANTY.
LIMITATION OF DAMAGES
IN ADDITION TO THE ABOVE WARRANTY DISCLAIMERS, IN NO EVENT WILL SLOAN VALVE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, EXEMPLARY, OR SPECIAL DAMAGES, INCLUDING ANY DAMAGES FOR LOST DATA OR LOST PROFITS, ARISING FROM OR RELATING TO THIS LIMITED WARRANTY OR THE PRODUCT, AND SLOAN VALVE COMPANY’S TOTAL CUMULATIVE LIABILITY ARISING FROM OR RELATED TO THIS LIMITED WARRANTY OR THE PRODUCT WILL NOT EXCEED THE AMOUNT ACTUALLY PAID FOR THE PRODUCT BY THE ORIGINAL PURCHASER.
LIMITATION OF LIABILITY
SLOAN VALVE COMPANY PROVIDES YOU INFORMATION (“PRODUCT INFORMATION”) REGARDING YOUR SLOAN PRODUCTS, ELECTRONICS AND SOFTWARE. WITHOUT LIMITING THE GENERALITY OF THE DISCLAIMERS ABOVE, ALL PRODUCT INFORMATION IS PROVIDED FOR YOUR CONVENIENCE, “AS IS”, AND “AS AVAILABLE”.  SLOAN VALVE COMPANY DOES NOT REPRESENT, WARRANT, OR GUARANTEE THAT PRODUCT INFORMATION WILL BE AVAILABLE, ACCURATE, OR RELIABLE. YOU USE ALL PRODUCT INFORMATION, AND THE PRODUCT, ELECTRONICS AND SOFTWARE AT YOUR OWN DISCRETION AND RISK. YOU WILL BE SOLELY RESPONSIBLE FOR (AND SLOAN VALVE COMPANY DISCLAIMS) ANY AND ALL LOSS, LIABILITY, OR DAMAGES, INCLUDING TO YOUR WIRING, FIXTURES, ELECTRICITY, BUILDING, PRODUCT, ELECTRONICS, SOFTWARE, COMPUTER, MOBILE DEVICE, AND ALL OTHER ITEMS RESULTING FROM YOUR USE OF THE PRODUCT INFORMATION, PRODUCT, ELECTRONICS AND SOFTWARE. PRODUCT INFORMATION PROVIDED BY SLOAN VALVE COMPANY IS NOT INTENDED AS A SUBSTITUTE FOR DIRECT MEANS OF OBTAINING THE INFORMATION. FOR EXAMPLE, INFORMATION PROVIDED THROUGH THE PRODUCT INFORMATION  IS NOT INTENDED AS A SUBSTITUTE FOR AUDIBLE AND VISIBLE INDICATIONS IN THE BUILDING AND ON THE PRODUCT, NOR A SUBSTITUTE FOR A MONITORING SERVICE THAT MONITORS THE LOCATIONS OF INSTALLATION OF THE PRODUCTS, ELECTRONICS AND SOFTWARE.
Y
our Rights and This Limited Warranty
This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction. Likewise, some of the limitations in this Limited Warranty may not apply in certain states, provinces or jurisdictions under certain circumstances. The terms of this Limited Warranty will apply to the extent permitted by applicable law. For a full description of your legal rights you should refer to the laws applicable in your jurisdiction and you may wish to contact a relevant consumer advisory service.
Sloan Valve Return Policy
At Sloan, our goal is to ensure our customers are satisfied with their purchase.  Our products are manufactured under the highest quality standards and are all backed by a limited warranty.
If a product is found defective prior to or during installation, Sloan may issue a return material authorization (RMA) number and credit in exchange for the defective product.
Should the customer require a part to repair a product, the part should not be taken from another finished good unit.  Reach out to Sloan directly. If parts are in stock they are usually sent out within 24 hours and customers will receive parts within 3 to 7 business days.  For non-inventoried items lead times may vary.  Parts that are needed sooner will be handled on a per case basis.  Credits may be denied for units returned incomplete or for cannibalized units.
If the product cannot be serviced, a credit may be requested and the factory may issue a RMA number.
Upon receipt of the returned product, Sloan will inspect and test the product prior to issuing credit.  Credit may be denied under the following conditions:
The product returned does not match the RMA
The returned unit is missing components
The returned unit has been cannibalized
The returned unit is out of the warranty period
The product has been damaged via field service ex-factory
The returned unit is not manufactured by Sloan
The product is not defective
If no apparent defect is found the customer may be contacted to clarify the reason for the return.
Do not initiate a debit memo or make any deductions.  Wait for a credit memo to be issued.  As described above, full credit may be denied in some circumstances.
If the product is not received by Sloan within 90 days of creating the RMA, the RMA will expire.
Credit is usually processed within 20 business days of product receipt.
Products which are determined to be defective or shipped incorrectly by Sloan will be credited at invoice price.  Products returned for reasons other than defects or Sloan errors are subject to a 25% handling charge, return freight is at customer’s expense.  If the invoice is not available, then credit will be issued based on the previous price sheet if the price sheet is less than one year old.  All returns must be authorized by the factory prior to returning.  The factory will issue a RMA number.  The RMA number must be visible on the outside of each carton being returned.
All returns of special finish and special order products are subject to a minimum 50% handling charge and must be returned within one year, original invoice required. Custom sink orders are not returnable. Sinks and mounting cannot be returned once shipped. If components (faucets, soap dispensers, hand dryers) have not been opened, they can be returned for partial credit.
All returned material should be returned in the original, unopened shipping cartons or suitably packed.  The material is to be packaged such that it will not be damaged during the return.
Material over 2 years old is subject to a 50% handling charge.  Any product over 3 years old will not be accepted.
Deductions will be made for any material returned that is not in saleable condition.  Material not in saleable condition will be returned to customer or scrapped at customer request.
When material is to be returned, call your representative, who will contact the factory for an RMA number.  The following information is necessary when requesting an RMA:
Invoice Number
Product Code Number
Product Part Number
Product Date Code
Quantity
Reason for return request (be specific, ‘defective’ is not a reason).  If defective, text must be included to describe the symptom of the problem.  For example. ‘Doesn’t work’ is not the symptom.  ‘Faucet not activating’ would be more appropriate.  Material returned as defective but, on inspection, is found serviceable will be returned to the customer at their expense or scrapped with no credit issued.  A test report will be available upon request.
All returns are to be freight prepaid
The RMA number must be on each load and each container.
OUR PROMISE TO YOU:
All items we sell are BRAND NEW. We purchase directly from the manufacturer. This is the exact product you would see in a showroom, for less money!
RETURN POLICY:
Returns are accepted within 30 days. The item must be in brand new condition, just as it was shipped to you. We cannot return items after they have been installed. Buyer must pay return shipping costs. Refund will be given as money back via PayPal. A 20% RESTOCKING FEE WILL BE DEDUCTED FROM ALL REFUNDS FOR RETURNED MERCHANDISE. If you need to return an item, or if you have questions about our policy, please send us a message here on eBay.
We are  a family owned business that opened their doors in 1936. It is now 4th generation owned. If you need assistance with your order please email us and we will get right back to you.
Thank you for choosing us.