Tektronix CSA8000 Communications Signal Analyzer Modular Telecom/Datacom Tester

Description

Tektronix CSA8000/TDS8000 Communications Signal Analyzer Modular Telecom/Datacom Tester
Passes self tests. Passes compensation.
The 80E02 modules are NOT included with this CSA8000. They were only installed to verify CH1-8 are working ok.  All 8 channels verified ok with a 80E02 module just like shown in the 1st picture.
Windows 98 SE, 192MB Ram, 6GB Hard Drive
USB thumb drive tested and working ok. Recommend to use PS2 mouse and keyboard.
The touchscreen works ok.
There is clear tape securing the lower portion of the plastic front panel on both sides of the scope. The tape is not too noticeable.  I believe a few front panel plastic securing clips are broken. Could have glued it, but tape is easier to remove in case future maintenance is needed.
The EXTERNAL REFRENCE 10MHZ INPUT bnc connector is a little out of round on the left side, but do not have any issue to connect a bnc cable to that port.
Power cord, 80E02 modules, keyboard and mouse are not included. There are scuffs, scratches, sticker residue and worn spots.
All buttons and knobs work. Floppy works. GPIB works. CD Drive works.