-40%

Tektronix DPO7254 Digital Phosphor Oscilloscope - 2.5 GHz, 40 GS/s, 4 Ch

$ 4749.35

Availability: 100 in stock
  • MPN: DPO7254
  • Brand: Tektronix
  • Configuration: 2RL MTM
  • Condition: Pristine Condition Comes As Pictured with 3- p6139A Voltage Probes
  • All returns accepted: ReturnsNotAccepted
  • Model: DPO7254

    Description

    Features and Benefits
    :
    3.5 GHz Bandwidth Model for Serial and Digital Applications
    Up to 40 GS/s Real-time Sample Rate on One Channel and up to 10 GS/s on All Four Channels
    Up to 500 Megasamples Record Length with MultiView Zoom™ Feature for Quick Navigation
    >250,000 wfms/s Maximum Waveform Capture Rate
    Up to 310,000 Waveforms per Second with FastFrame™ Segmented Memory Acquisition Mode
    User-selectable Bandwidth Limit Filters for Better Low-frequency Measurement Accuracy
    MyScope
    ®
    Custom Windows and Right Mouse Click Menus for Exceptional Efficiency
    Event Search and Mark to Find Specific Events in the Entire Waveform
    Pinpoint
    ®
    Triggering provides the Most Flexible and Highest Performance Triggering, with Over 1400 Combinations to Address Virtually Any Triggering Situation.
    12.1” XGA Display with Touch Screen
    Communications Mask Testing
    Clock Recovery from Serial Data Streams
    64-bit NRZ Serial Pattern Trigger for Isolation of Pattern-dependent Effects up to 1.25 Gb/s
    Low-speed Serial Protocol Triggering and Decode (I
    2
    C, SPI, RS-232, CAN, LIN, and FlexRay)
    Technology-specific Software Solutions provide Built-in Domain Expertise for MIPI
    ®
    D-PHY, Ethernet, USB 2.0 Compliance Testing, Jitter, Timing, Eye Diagram, Power, DDR Memory Bus Analysis, CAN, LIN, and FlexRay Network Design
    OpenChoice
    ®
    Software with Microsoft Windows XP OS enables Built-in Networking and Extended Analysis
    Applications
    :
    Signal Integrity, Jitter, and Timing Analysis
    Verification, Debug, and Characterization of Sophisticated Designs
    Debugging and Compliance Testing of Serial Data Streams for Telecom and Datacom Industry Standards
    Low-speed Serial Bus Design (I
    2
    C, SPI, RS-232, CAN, LIN, and FlexRay)
    Investigation of Transient Phenomena
    Power Measurements and Analysis
    Spectral Analysis
    Characteristics
    :
    Vertical System
    :
    Input Channels:
    4
    Bandwidth (DSP Bandwidth Enhance):
    3.5 GHz
    Rise Time (DSP Bandwidth Enhance):
    115 ps
    Hardware Analog Bandwidth (-3 dB):
    2.5 GHz
    Rise Time 10% to 90% (Typical):
    145 ps
    Rise Time 20% to 80% (Typical):
    95 ps
    DC Gain Accuracy:
    ±1% with offset/position set to 0
    Input Coupling:
    AC, DC, GND
    Input Impedance (Software selectable):
    1 MO ±1% with 13 pF ±2 pF or
    50 O ±1%
    Input Sensitivity:
    1 MO:
    1 mV/div to 10 V/div
    50 O:
    1 mV/div to 1 V/div
    Vertical Resolution:
    8 bit (>11 bit with Hi Res)
    Max Input Voltage:
    1 MO:
    ±150 V CAT I, derate at 20 dB/decade to 9 VRMS above 200 kHz
    50 O:
    5
    VRMS
    with peaks less than ±24 V
    Position Range:
    ±5 divisions
    Offset Range:
    1 mV/div to 50 mV/div:
    ±1 V
    50.5 mV/div to 99.5 mV/div:
    ±(1.5 V – 10 divisions)
    100 mV/div to 500 mV/div:
    ±10 V
    505 mV/div to 995 mV/div:
    ±(15 V – 10 divisions)
    1 V/div to 5 V/div:
    ±100
    5.05 V/div to 10 V/div:
    ±(150 V – 10 divisions)
    Offset Accuracy:
    1 mV/div to 9.95 mV/div:
    ±0.2% (offset value-position) ±0.1 div ±1.5 mV
    10 mV/div to 99.5 mV/div:
    ±0.35% (offset value-position) ±0.1 div ±1.5 mV
    100 mV/div to 1 V/div:
    ±0.35% (offset value-position) ±0.1 div ±15 mV
    1.01 V/div to 10 V/div:
    ±0.25% (offset value-position) ±0.1 div ±150 mV
    Delay Between Any Two Channels (Typical):
    =100 ps (50 O, DC coupling and equal V/div at or above 10 mV/div)
    Channel-to-Channel Isolation (Any 2 channels at equal Vertical Scale Settings) (Typical):
    =100:1 at =100 MHz
    =30:1 between 100 MHz and 2.5 GHz
    > 20:1 between 2.5 and 3.5 GHz
    Time Base System:
    Time Base Range:
    25 ps/div to 1000 s/div
    Time Resolution (in ET/IT mode):
    250 fs
    Time Base Delay Time Range:
    5 ns to 250 s
    Channel-to-Channel Deskew:
    Range ±75 ns
    Delta Time Measurement Accuracy:
    ((0.06 / sample rate) + (2.5 ppm × Reading)) RMS
    Trigger Jitter (RMS):
    1.5 psRMS (typical) with enhanced triggering OFF
    Jitter Noise Floor:
    Time Base Accuracy:
    ±2.5 ppm + Aging
    Acquisition System:
    Real-Time Sample Rates
    :
    1 Channel (Max):
    40 GS/s
    2 Channels (Max):
    20 GS/s
    3-4 Channels (Max):
    10 GS/s
    Equivalent Time Sample Rate (Max):
    4 TS/s (for repetitive signals)
    Maximum Record Length Per Channel:
    Standard Configuration:
    1 Channel:
    50 M
    2 Channel:
    25 M
    4 Channel:
    12.5 M
    Record Length Opt. 2RL:
    1 Channel:
    125 M
    2 Channel:
    50 M
    4 Channel:
    25 M
    Record Length Opt. 5RL
    1 Channel:
    250 M
    2 Channel:
    125 M
    4 Channel:
    50 M
    Record Length Opt. 10RL
    1 Channel:
    500 M
    2 Channel:
    250 M
    4 Channel:
    125 M
    Maximum Duration at Highest Real-Time Resolution (1 Channel):
    Resolution:
    25 ps (40 GS/s)
    Max Duration with Standard Record Length and Sample Rate:
    1 ms
    Max Duration with Opt 2RL
    : 2 ms
    Max Duration with Opt 5RL:
    5 ms
    Max Duration with Opt 10RL:
    10 ms